» » » How to Replace an Oxygen Sensor

Note: This is a general guide for all vehicles.

How to Replace an Oxygen Sensor

Select Vehicle
Advertisement
Parts
  • Oxygen Sensor
Tools
  • Crimp Tool
  • Scan Tool
  • 2 more tools
Difficulty

Moderate

Edit Guide

Steps

Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1
Park the vehicle on a level surface. Set the parking brake and open the hood.
2
With the engine off and cool, locate the defective oxygen sensor in the exhaust manifold or pipe. If necessary, lift the front of the vehicle and support it with jack stands.

53346
3
Disconnect the wire connector at the defective oxygen sensor. Spray the sensor threads and fitting with penetrating spray and let soak for a time.

53347
4
Remove the oxygen sensor from the exhaust system. Use an oxygen sensor socket to reduce potential for damage.
5
If you are installing a universal oxygen sensor, cut off the connector from the original sensor and splice the connector wires to the new oxygen sensor. Follow the manufacturer's instructions supplied with the sensor.
6
For threaded oxygen sensors, apply a slight amount of anti-seize compound to the threads and install the new sensor.
7
For flange mounted oxygen sensors, install a new gasket and tighten the mounting bolts.
8
Reattach the wire connector from the sensor.
9
If necessary, connect the OBD I/II scanner and erase the fault code.

Car Problems?

Find a Shop

near you!

Advertisement
Advertisement
Help improve this guide!  Edit
Did you find this guide helpful? 
Advertisement
Advertisement

Advertisement
 

Guide Contributors

  • my_ynoh at AutoMD.com
  • Jimm at AutoMD.com
  • yboy82 at AutoMD.com
  • Help improve this guide and be a top contributor!
 
Advertisement

Car Problems?

Find a Shop

near you!

亚洲中文无码亚洲人成影院_三上悠亚的AV片在线无码_狠狠躁天天躁无码中文字幕